SBO on IR Element Supply Co.

Sidel SBO replacement bulb 380V

Wed, 22 Jul 2026 06:17:26 +0800

Stop Fighting Your Sidel SBO and SIG Blomax Lamps

If you’re running Sidel SBO or SIG Blomax lines, you know the headache of lamps burning out way too often. It’s frustrating. You’re in the middle of a run, and suddenly you’ve got downtime because a bulb gave up the ghost. Usually, it’s just thermal stress or a weak build that can’t handle the vibration. We got tired of seeing that happen, so we built a 380V replacement that actually holds up to the grind of PET blowing. The heat is where it counts To get those preforms heated fast, you need a specific kind of power density. We used high-grade quartz glass so the filament stays steady even when it’s working hard. The result? A concentrated shortwave IR output. In plain English: the heat gets into the PET wall faster. Just a heads-up: since these run at a higher voltage, your lamp holders take a bit more heat. Do yourself a favor and check your wiring for any oxidation. You don’t want arcing at the terminals ruining your day. Built to actually last Most standard bulbs fail at the pinch seal. It’s the weakest link. We beefed up the structural design here to make sure they don’t snap during installation or shake apart while the machine is humming. They’re simple drop-in replacements. They fit the existing footprint of your SBO oven, so you can just swap them out without having to mess around with the wiring rack. Plus, we added a specialized halogen cycle. This keeps the quartz clear, which stops that “blackening” effect that usually kills your heat output over time. A few tips to keep them running These are built for high-speed environments, and using a reinforced 380V tube means fewer “dead zones” in your oven. That’s the secret to avoiding those annoying uneven heats and deformed bottles. But here’s the thing: the best bulb in the world can’t fight a dirty mirror. Keep your reflectors clean. If dust builds up, it creates hotspots on the glass, and that’ll kill the bulb regardless of how tough it is. And check your cooling fans. If they’re clogged, the lamps run hotter than they’re supposed to. And as we all know, too much heat is the fastest way to a burnout.

Sidel SBO 2002406262 replacement lamp

Mon, 20 Jul 2026 13:24:27 +0800

Let’s talk about the Sidel SBO 2002406262 Replacement Lamp

If you’ve ever dealt with PET preform heating, you know the struggle. You need the plastic soft enough to blow, but not so hot that you burn the surface. It’s a delicate balance. That’s exactly why we built our version of the SBO 2002406262 lamp. We designed these to be simple drop-in replacements. They aren’t just for Sidel machines, either—they work with pretty much any blowing equipment you’ll find on a factory floor. Getting the heat just right Here is the thing about heat flux: if it’s off, your bottles are ruined. We use high-wattage halogen filaments tucked inside heavy-wall quartz to keep things precise. We’ve tuned the voltage and wattage to mirror the original OEM specs. This means your power supply won’t freak out and trip, and your heating profile stays steady across the whole oven. One quick tip: if you’re running these at full blast, make sure your cooling blowers are actually clean. If the housing overheats, you’re just killing the life of the filament. Simple as that. The “tough stuff” We use high-purity quartz glass because these lamps go through a lot of thermal shock. They heat up and cool down fast, and cheap glass just can’t take that. Plus, many of our tubes have a special coating. It shifts the emission spectrum so the heat actually hits the plastic instead of just warming up your machine frame. As for the connections, we stick with R7s or Sk15 bases. Why? Because they don’t melt. In a high-heat environment, cheap plastic is a liability. These give you a tight, mechanical fit so the lamp doesn’t vibrate loose while you’re running at high speeds. Putting them to work The best part? You don’t have to mess with your wiring or rebuild your brackets. You get the same heat distribution as the original part, but you don’t have to wait weeks for a shipment to arrive. Since we kept the dimensions and electrical loads standard, these fit about 95% of the blowing machines out there. Just double-check your voltage and length before you plug them in, and you’re good to go.

Sidel SBO 16 Series 2 IR heater bulb

Mon, 06 Jul 2026 11:30:52 +0800

Why getting the specs exactly right makes all the difference

We built this Sidel SBO 16 Series 2 IR heater bulb to be a straight swap for the Sidel Matrix. The whole point? Match the original heat output and how it responds, down to the letter. Pop in our bulb, and your heating curve doesn’t need reworking. The machine sees the same electrical draw and the same heat behavior, so your PET blowing keeps running without a hiccup.

Replacement lamp for Sidel SBO 10

Sat, 06 Jun 2026 06:48:21 +0800

On a Sidel SBO 10 line, uneven preform heating shows up fast. Thin walls. PET haze. And you’re staring at a growing pile of rejects before the blow station. More often than not, the root cause is an aging lamp that can’t hold the thermal profile anymore. We run a replacement lamp that brings the heating tunnel back to its original behavior.

What matters, technically

We match the OEM’s power density and geometry so the lamp drops in and performs exactly as intended. The emitter is tuned for PET absorption, putting predictable energy into the preform wall during preform heating. The lamp’s thermal profile is controlled to keep the heating curve stable, so the preform surface and core hit the right temperature spread. We spec the correct voltage, wattage, and the R7s connector interface to fit the SBO 10 reflector and wiring—no modification needed.