Let’s talk about the Sidel SBO 2002406262 Replacement Lamp
If you’ve ever dealt with PET preform heating, you know the struggle. You need the plastic soft enough to blow, but not so hot that you burn the surface. It’s a delicate balance. That’s exactly why we built our version of the SBO 2002406262 lamp. We designed these to be simple drop-in replacements. They aren’t just for Sidel machines, either—they work with pretty much any blowing equipment you’ll find on a factory floor. Getting the heat just right Here is the thing about heat flux: if it’s off, your bottles are ruined. We use high-wattage halogen filaments tucked inside heavy-wall quartz to keep things precise. We’ve tuned the voltage and wattage to mirror the original OEM specs. This means your power supply won’t freak out and trip, and your heating profile stays steady across the whole oven. One quick tip: if you’re running these at full blast, make sure your cooling blowers are actually clean. If the housing overheats, you’re just killing the life of the filament. Simple as that. The “tough stuff” We use high-purity quartz glass because these lamps go through a lot of thermal shock. They heat up and cool down fast, and cheap glass just can’t take that. Plus, many of our tubes have a special coating. It shifts the emission spectrum so the heat actually hits the plastic instead of just warming up your machine frame. As for the connections, we stick with R7s or Sk15 bases. Why? Because they don’t melt. In a high-heat environment, cheap plastic is a liability. These give you a tight, mechanical fit so the lamp doesn’t vibrate loose while you’re running at high speeds. Putting them to work The best part? You don’t have to mess with your wiring or rebuild your brackets. You get the same heat distribution as the original part, but you don’t have to wait weeks for a shipment to arrive. Since we kept the dimensions and electrical loads standard, these fit about 95% of the blowing machines out there. Just double-check your voltage and length before you plug them in, and you’re good to go.